The global market for motorcycles is valued at $105.52 billion as of 2021, and it’s expected to grow to $233.51 by 2031.
This craze for this two-wheeler is justified. After all, motorcycles are stylish and much easier to maintain than a car. They have smaller and fewer parts, making it easy to easier access and maintenance.
However, to make this bad boy give you its full worth, you must stay updated with all the repairs and maintenance.
So, before you get ready for your next ride, check out the key steps and keep everyone safe!
Be sure to start with fresh fuel
If it has been long since you last rode your motorcycle, change the fuel before you go for a ride.
Gasoline gets stale if it’s left in the tank for too long. And if you use old fuel can result in decreased fuel efficiency and difficulty in starting the engine, leading to engine damage in the long run.
Use a siphon pump to empty the old gasoline and fill it with fresh fuel for a smooth ride.
Always change the oil
Next, you must check if you need to change the oil and filter. It is responsible for lubricating your gears and engine. If you don’t change the oil frequently, it will damage the engine and affect its longevity.
The motorcycle manual will have all the information on how frequently it needs to be done. Be sure to follow it to keep up the condition of your two-wheeler.
If you run it on dirty oil, it will affect the engine and increase fuel consumption. Further, you must check for oil leakages, as carbon deposits can thicken the oil and drag the engine’s movements.
Check the battery life
Do not skip the battery check during your motorcycle maintenance runs. You must take great care of it to make the most out of the battery life.
If something is wrong with the battery, don’t hesitate to invest in a new one to avoid sudden malfunction during rides.
If you want to power your rides, opt for the best lithium motorcycle batteries. It is ideal for power and rough riding, both on and off-road.
Make sure you top up the battery with distilled water whenever needed. Examine for leakages to avoid mishaps. Keep the battery fully charged if you won’t use it for long periods.
Don’t miss out on the other fluids
Your motorcycle does not just depend on oil and gasoline. Brake fluid and coolant are also vital for optimal functioning. These liquids may leak if you don’t use them for a long time. So, check these fluid levels and refill or top it off whenever needed. Remember that you must flush out the old fluids and replace them with new ones to extend the longevity of your motorcycle.
Check your tires
Tires are one of your motorcycle’s most important and defining parts, so don’t miss out on maintaining them. Be mindful of the air pressure in your tires and that it’s safe before you set off for a ride.
While at it, check your tread to ensure it has enough depth to give you enough traction. After checking those, look intently for cracks or damages along the sideline.
Do not overlook the brakes
Make sure that both the brakes hold the tires and are properly spaced. If you ride with brakes that are too tight or too loose, it may cause a disaster.
So, tighten your brakes to your desired levels and be mindful of it. If your motorcycle makes a screeching sound every time you use your brakes, change the brake pads up front.
It might also be due to a lack of proper lubrication. Thus, do a proper inspection and take the necessary actions. It is also important for you to replace the front and rear brake oil according to the recommended specification.
Wrap it Up!
Just like any other vehicle, buying a two-wheeler comes with some responsibilities. Follow the necessary know-how in this article about maintaining your motorcycle to protect yourself and others from mishaps resulting from neglect and lack of care.
If you’re unsure how to proceed with the servicing, seek professional help.
